Erosion and Sediment Control Tip #78

 

This picture clearly shows the difference between adequate mulch (left) and too little mulch (right).  Adequate mulch when used alone for soil protection should have 100% ground cover. Inadequate mulch cover results in splash erosion which often initiates the erosion process.

 

Perry L Oakes, PE

Program Coordinator

AL Erosion and Sediment Control Program

Comments

Post a Comment

Popular posts from this blog

Today’s Erosion and Sediment Control Tip: #16

Image
  Today’s Erosion and Sediment Control Tip Sediment Basins require a device to dewater from the surface of the basin to remove the cleanest (less turbid) water.  This is often accomplished with a skimming device that is designed to remove the stored construction runoff over a period of 2 to 5 days.  It is important that the skimmer be installed and maintained properly. Skimmers must have a flexible connection to the rigid pipe or riser system that goes through the dam.  It should easily operate at all design elevations.  When placed on a principal spillway riser, the pipe from the skimmer to the flexible connection should be about 1.5 x the height of the riser structure. The flexible pipe outlet at the rigid pipe or riser system through the dam should be at the standing pool elevation to ensure the skimmer does not function below the required elevation. A rock pad should be constructed for the skimming device to rest on when discharge is complete.  The skim...
Read more

Erosion and Sediment Control Tip #72

Image
  Could someone please explain to me why landscaping is usually the “LAST” item to be complete on a construction job? Exposed soil should be stabilized at EVERY opportunity during a construction project.     ONLY 9 DAYS LEFT FOR EARLY BIRD REGISTRATION FOR CLEAR WATER ALABAMA!!   Perry L Oakes, PE Program Coordinator AL Erosion and Sediment Control Program
Read more